Sheds -    Planning to build a shed,   draw an outline of the shed,   check zoning restrictions & local building codes,   different styles of sheds,   gable shed,   hip roof,   gambrel roof,   salt-box or offset-ridge shed,   lean-to roof.  Master trades, professional staff helping you economically.   "Philadelphia ' s Action Information Group"   - Contractors Solutions Inc.

  Shed Planning Information
   

heres the cost

                 For More Information on this subject or on any property related topic:   Just Ask Us

An expanding information page for:  Shed Planning


A.  General Information
         Sheds can be the most functional building on your property and can also have a distinctly romantic quality. They can complement a home and its surrounding landscape and can be a destination for paths and a centerpiece for plantings or even a decorative pond. They usually don't require any plumbing, wiring, or interior wall surfacing. Whatever you're going to use your shed for, it's a fundamentally simple structure. Sheds can give an opportunity to use secondhand doors that don't have the right size and style for the home. It may be easy to just buy a pile of lumber and build the shed in a weekend. But, you need to plan ahead if you want it to look good and function well.


B.  Begin by Drawing an Outline of the Shed
         shed-draw-it Think about your own needs as well as local codes and zoning laws. Imagine what you'll use it for now and in the future because we tend to need more space as time goes on. You'll need to identify spacing needs inside this structure. Begin by drawing an outline of the intended structure on graph paper as close to scale as possible; using a scale of ¼ inch equaling 1 foot works well. Then start measuring everything you will store inside: cars, bikes, boxes, workbenches, lawn mowers, etc. and think about how all of it will be stored. Pencil these inside your structure's outlines and check the spacing to make sure you have plenty of room. Leave at least a 12-inch-zone around lawn mowers, bikes, and boxes so you can walk around them.

C.  Check Zoning Restrictions and Local Building Codes
         In many areas, zoning restrictions and local building codes regulate where you can place your structure and define its maximum dimensions. To find out, consult with your building inspector. He will let you know if you'll need a building permit and inspection to see if the structure meets minimum code requirements. Once you know of any restrictions, you can pick the final spot to put it. Think about access and traffic flow in all four seasons. Walk around and observe how the structure will be seen from your house or property line.

D.  Five Shed Styles to Choose From
         There are five major shed styles to choose from: gable, gambrel, lean-to, saltbox, and hip. They are the basic shapes but there are variations of each type.


shed_gable-roof



On a gable shed, the two halves of the roof join together in the classic triangular shape. Gable roofs are simple and economical to build and offer superior load-bearing and drainage capabilities.
shed_hip-roof



A hip roof is formed by sloping the ends of a gable roof toward the center. This creates an overhang around all four sides of the structure.
shed_gambrel-roof



A gambrel roof is a gable roof with two slopes or pitches on each side. It's more complicated to frame, but it offers a lot more headroom and storage space than a gable roof.
shed_offset-ridge-roof



A salt-box, or offset-ridge shed, is similar to a gable except that storage space is added to the front and capped with a narrow roof section. This creates a ridge line that's offset from the center and also more space inside.
shed_lean-to-roof



A lean-to roof design is inexpensive and easy to frame. But because of the slope, headroom inside varies a lot from front to back.



Around Philly Trades and Service Directories for:

Abington 19001,   Aldan 19018,   Ambler 19002,   Ardmore 19003,   Aston 19014,   Bala Cynwyd 19004,   Bensalem 19020,   Berwyn 19312,   Blue Bell 19422,   Bridgeport 19405,   Brookhaven 19015,   Broomall 19008,   Bryn Mawr 19010,   Chadds Ford 19317,   Cheltenham 19012,   Chester City,   Chesterbrook 19406,   Chester Heights 19017,   Clifton Heights 19018,   Concordville 19331,   Conshohocken 19428,   Darby 19023,   Devon 19333,   Dresher 19025,   Drexel Hill 19026,   Eddystone ,   Edgemont 19028,   Folcroft 19032,   Gladwyn 19035,   Glen Mills 19342,   Glenolden 19036,   Havertown 19083,   Huntingdon Valley 19006,   Jenkintown 19046,   King of Prussia 19406,   Lafayette Hill 19444,   Lansdowne 19050,   Lima 19037,   Malvern 19355,   Marcus Hook 19061,   Media 19063,   Morton 19070,   Narberth 19072,   Newtown Square 19073,   Norwood 19074,   Norristown 19403 and 19404,   Paoli 19301,   Plymouth Meeting 19462,   Prospect Park 19076,   Ridley Park 19078,   Ridley Township 19094, 19043, 19033, 19022, 19081, 19078, 19070,   Springfield 19064,   Swarthmore 19081,   Upper Darby 19082,   Valley Forge 19481,   Wayne 19087,   West Chester 19380                                                                              Delaware County, Montgomery County and Philadelphia

Send Us Your Business Info